shopify visitor statistics


Best Paper Awards 2017

Best Research Paper

Prof. Kaustubh Kulkarni
Indian Institute of Technology Kanpur

Best Student Paper

Mr. Chunjia Bao & Mr. Tianyou Lou

Best Paper Awards 2016

Best Research Paper

Dr. Subhranshu Chatterjee
Indian Institute of Engineering Science and Technology

Best Student Paper

Mr. Arvind Kumar
Indian Institute of Technology

 Indexed By

Crossref logo

and others

Prior Year's Accepted Papers

2017 2016 2012  2011

2011 Accepted Papers

Paper Title DOI#
Conductometric Gas Sensors based on Nanostructured WO3Thin Films 10.5176/2251-1857_M312.01
Physics and Applications of Superhydrophobic and Superhydrophilic Surfaces and Coatings 10.5176/2251-1857_M312.51
Testing of Plant Fiber Compositesthe Potential of Acoustic Emission Methods 10.5176/2251-1857_M312.15
Impact Perforation Characteristics of Glass/Epoxy Composite Laminates with Modified Ply Interfaces 10.5176/2251-1857_M312.23
Synthesis of NiTi alloy from thin Ni/Ti multi-layer 10.5176/2251-1857_M312.27
Fatigue Characteristic of High Manganese Spheroidal Vanadium Carbides Cast Iron 10.5176/2251-1857_M312.31
Impingement and Solidification of Molten Metal Droplet on a Cold Substrate 10.5176/2251-1857_M312.37
Two Stage SPF of a V-Shape Aluminum Sheet into a Trough of Saddle-Contour 10.5176/2251-1857_M312.12
Enhancement of room temperature formability of strip cast AZ31 alloy sheet by High Temperature Rolling and Annealing Approach 10.5176/2251-1857_M312.58
Effect of tools eccentricity to the pull-out strength in sheet metal clinching process 10.5176/2251-1857_M312.60
Selection of Optimal Conditions in the Surface Grinding Process Using Quantum Based Optimization Method 10.5176/2251-1857_M312.39
Development of SnO2 based sensors with improvement in sensitivity and response-recovery time 10.5176/2251-1857_M312.28
Effect of interlayer sp3carbons on Mechanical Properties of Multi-crystalline Graphites using Molecular Dynamics Simulations 10.5176/2251-1857_M312.24
FEM Analysis of the Impact Angle Dependence of Erosion Wear 10.5176/2251-1857_M312.33
A constitutive relation based on Maxwell fluid model for DB propellants in uniaxial compression condition 10.5176/2251-1857_M312.55
Applications of Rigid-plastic Finite Element Method Using Euler’s Fixed Meshing Method for Cold Forging  10.5176/2251-1857_M312.61
A Comparative Study of Constitutive Models to Predict Flow Stress Behaviour in Dynamic Strain Aging Regime of Austenitic Stainless Steel 316 10.5176/2251-1857_M312.71
Microstructural Evolution of TRIP aided Duplex Stainless Steels during Tensile Deformation 10.5176/2251-1857_M312.57
Investigations on microstructural characterization of microwave composite clads on austenitic stainless steel 10.5176/2251-1857_M312.72
The use of NIR absorbing primers to optimize the NIR cure of polyester coil coatings 10.5176/2251-1857_M312.19
Rejuvenation of long-term service exposed Nimonic 80A turbine blades 10.5176/2251-1857_M312.11
Abrasive wear resistance characteristics of spheroidal vanadium carbide cast iron 10.5176/2251-1857_M312.30
Nano-finishing of aircraft blade bearing by Magnetic Abrasive Finishing (MAF) process 10.5176/2251-1857_M312.38
Effect of various non conventional aging treatments on the tensile properties and quality indices of cast and heat treated aluminum alloy 354 components 10.5176/2251-1857_M312.34
The Effects of Machining Polycrystalline Diamond by Micro-EDM 10.5176/2251-1857_M312.56
Prediction of Material Removal Rate in Rotary Tool Electric Discharge Machining Using Adaptive NeuroFuzzy Inference System 10.5176/2251-1857_M312.66
Experimental Analysis of Rotary Tool Electrical Discharge Machining Using Response Surface Methodology 10.5176/2251-1857_M312.63
Environmentally Friendly Process to Electroless Nickel Plating Waste Liquor by Solvent Extraction 10.5176/2251-1857_M312.02
Towards Success in Higher Education in Engineering and Technology: A coaching approach to develop holistic graduates 10.5176/2251-1857_M312.35
Ground Granulated Blast-furnace Slag Geopolymer Incorporating Municipal Solid Waste Incineration Fly Ash 10.5176/2251-1857_M312.35
Analysis of Supply Chain Conflicts Using Colored Petri Nets 10.5176/2251-1857_M312.73
Electrochemical corrosion behaviour of automotive exhaust muffler after heat cycle 10.5176/2251-1857_M312.50
Optimization of process parameters of Friction Stir Welding on Al-Mg Alloy by desirability function analysis using Taguchi technique 10.5176/2251-1857_M312.25
An Image-based Quality Inspection System for Automated Handling of Wooden Parts  10.5176/2251-1857_M312.18
Synthesis of magnetite nanoparticles directly from a low-grade iron ore 10.5176/2251-1857_M312.21
Effects of vibration frequency and amplitude of sonication on electroplating Ni-based carbon nanotube composite coatings  10.5176/2251-1857_M312.43
The effect of filler weld material on the mechanical properties of TIG welded AA6061 alloy weldments 10.5176/2251-1857_M312.53

Singapore Attractions

Global Science and Technology Forum - GSTF reserves the right at its sole discretion to postpone or change the venue,
date and/or time of the conference without prior notice before early bird registration deadline.